New CO2 Manifold!

Just got done making this today. Basically I used a 1/4" female T and three 1/4"->1/8" hose barbs to split the CO2 line. I glued this to a Hammond PCB Board enclosure that I had from when I made a DIY headphone amp. Then I through mounted the Fabco needle valves to the front panel and drilled holes in the back panel for the CO2 tubing to come out. After that it was just a matter of hooking up the hosing. I am using this to control CO2 on this tank as well as my high tech 10 Gallon.